Holders With Modules - Siemens SIRIUS ACT 3SU1 System Manual

9.2

Holders with modules

Overview of holders with contact module
These variants are preassembled. You need only snap them onto the actuator, tighten the
fastening screws and connect the cables.
You can find information about the contact modules used in Chapter "Contact modules for
front plate mounting (Page 171)".
Holder position 1
Plastic
Siemens Industry Mall (http://mall.industry.siemens.com/mall/en/ww/Catalog/Products/10221517)
3SU1400-1AA10-1BA0
3SU1400-1AA10-1CA0
3SU1400-1AA10-1BA0
3SU1400-1AA10-1CA0
Metal
Siemens Industry Mall (http://mall.industry.siemens.com/mall/en/ww/Catalog/Products/10221517)
3SU1400-1AA10-1BA0
3SU1400-1AA10-1CA0
3SU1400-1AA10-1BA0
3SU1400-1AA10-1CA0
3SU1400-1AA10-1BA0: Contact module 1NO normally open contact
3SU1400-1AA10-1CA0: Contact module 1NC normally closed contact
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
Holder position 2
—
—
—
—
—
—
—
—
Holder position 3
—
—
3SU1400-1AA10-1BA0
3SU1400-1AA10-1CA0
—
—
3SU1400-1AA10-1BA0
3SU1400-1AA10-1CA0
3SU15 holders
9.2 Holders with modules
Article number
3SU1500-1AA10-1BA0
3SU1500-1AA10-1CA0
3SU1500-1AA10-1NA0
3SU1500-1AA10-1PA0
3SU1550-1AA10-1BA0
3SU1550-1AA10-1CA0
3SU1550-1AA10-1NA0
3SU1550-1AA10-1PA0
217