Use Of Accessories For The Enclosure; Enclosure With Recess For Labeling Plate - Siemens SIRIUS ACT 3SU1 System Manual

13.13

Use of accessories for the enclosure

13.13.1

Enclosure with recess for labeling plate

Please note the following instructions for using the accessories:
Enclosure with recess for labeling plate
Accessories
Label holder (Page 388)
Square single frame (Page 432)
EMERGENCY STOP backing
plate/backing label (Page 366)
Protective collar for EMERGENCY
STOP (Page 402)
360° protective collar (Page 402)
Protective collar for pushbutton
(Page 402)
Protective collar for mushroom
pushbutton (Page 402)
Sun collar (Page 402)
Protective collar 360° for pushbutton
and short selector (Page 402)
Locking device (Page 406)
Protective collar for padlocks
(Page 402)
Protective caps (Page 392)
Dust cap for key-operated switches
(Page 392)
Sealable cap (Page 391)
Labeling plate for enclosures with
EMERGENCY STOP with recess
(Page 379)
Sealing plug (Page 417)
Enclosure adapters for mounting 2-pole
contact modules (Page 427)
Enclosure mounting adapters for strut
profiles (Page 428)
Enclosure cover monitoring (Page 428)
When using an accessory that is mounted between the actuating element and the front plate,
the maximum thickness of the front plate is reduced by the corresponding value of the
accessory.
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
Suitable for front mounting
✓
✓
—
—
—
✓
✓
✓
✓
—
—
✓
✓
✓
✓
✓
✓
✓
—
13.13 Use of accessories for the enclosure
Suitable for base mounting
3SU19 accessories
—
—
—
—
—
—
—
✓
—
—
—
—
✓
—
✓
✓
—
✓
✓
437