Intended Use - Siemens SIRIUS ACT 3SU1 System Manual

Safety notes

2.1 Intended use

Note
Lamps and LED modules are designed solely for use with SIRIUS pushbuttons and signaling
devices. They are not suitable for use in domestic lighting systems.
Note
Always make sure that the components (particularly those with a holder or actuator) are
securely installed (free from vibration). Mount them on a support of at least 1 mm thickness.
Note
The 3SU1 devices described in this manual may only be installed at temperatures of > -5 °C.
2.1 Intended use
Hazardous Voltage
Can Cause Death, Serious Injury, or Property Damage.
Intended use of hardware products
This equipment is only allowed to be used for the applications described in the catalog and
in the technical description, and only in conjunction with non-Siemens equipment and
components recommended by Siemens.
Correct transport, storage, installation and assembly, as well as careful operation and
maintenance, are required to ensure that the product operates safely and without faults.
EU note: Commissioning is absolutely prohibited until it has been ensured that the machine
in which the component described here is to be installed complies with the stipulations of
the Directive 2006/42/EC.
Hazardous Voltage
Can Cause Death, Serious Injury, or Damage to Property.
Carry out function test of the system
To ensure the safety of the system, any changes to it or any replacement of defective
components must be followed by a thorough and successfully completed function test of
the system.
A complete function test consists of the following tests:
• Configuration test (test of the configuration)
• System test (wiring test of the connected sensors and actuators)
22
WARNING
WARNING
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010