Selector Switches 4 Switch Positions - Siemens SIRIUS ACT 3SU1 System Manual

3SU10 pushbuttons and indicator lights
5.2 3SU10 devices for use on 4-slot holder
5.2.2

Selector switches 4 switch positions

Selector switches are used to actuate contact modules. The selector switch has 4 defined
switch positions (0 position 3/6/9/12 o'clock). When these switch positions are changed, the
current operation is concluded before the new one is activated.
These devices are available in different variants according to the following features:
● Collar and front ring material
A holder for 4 modules (3SU15.0-0BA10-0AA0) is required for all of the devices listed below.
You will find additional information on this in Chapters "Holders (Page 213)", "Mounting
(Page 109)" and "Equipping with contact modules without EMERGENCY STOP (Page 177)".
Selector switches 4 switch positions (rotary knob)
Collar / Front ring material
Plastic / Plastic
Black / White
•
Plastic / Metal, matte
Black / White
•
Metal / Metal
Black / White
•
Control of the modules using the selector switch
In the selector switch's intermediate positions (10:30 or 1:30 o'clock), no module is
controlled.
Switch position
3 h
6 h
9 h
12 h
108
Module at
holder position 1 holder position 2
X
—
—
—
4 switch positions
3SU1000-2AS60-0AA0
3SU1030-2AS60-0AA0
3SU1050-2AS60-0AA0
Module at Module at
holder position 3
—
X
—
—
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010
Module at
holder position 4
— —
— —
X —
— X