Protective Cap - Siemens SIRIUS ACT 3SU1 System Manual

3SU19 accessories
13.3 Protection
13.3.2

Protective cap

The protective cap is fitted before the actuating element is installed so as to protect the
element against dust and contamination.
Siemens Industry Mall
(http://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10221534)
392
Description
Protective cap for flat pushbuttons; material silicone
Suitable for:
All pushbuttons with 22.5 mm mounting diameter with
•
flat button and front ring
(not suitable for twin pushbuttons)
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Protective cap for raised pushbuttons; material silicone
Suitable for:
All pushbuttons with 22.5 mm mounting diameter
•
(not suitable for twin pushbuttons)
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Protective cap for selector switches, short selector;
material silicone
Suitable for:
All selector switches (short selector)
•
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Protective cap for mushroom pushbuttons, 30 mm and
40 mm diameter; material: silicone
Suitable for:
2-pos. mushroom pushbuttons, 30 mm and 40 mm
•
diameter
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Protective cap for EMERGENCY STOP button; material:
silicone
Suitable for:
EMERGENCY STOP buttons, 30 mm and 40 mm
•
diameter, without key-operated release
Installation in enclosures only in combination with
•
single-pole contact modules for front plate mounting
Article number
3SU1900-0DB70-0AA0
3SU1900-0DC70-0AA0
3SU1900-0DD70-0AA0
3SU1900-0DE70-0AA0
3SU1900-0DF70-0AA0
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 08/2018, A5E03457306020A/RS-AK/010