®
R&S
TSMA6
5.3.3 Connecting the R&S TSMA6-BP Battery Pack Unit
Alternatively, it is possible to power the R&S TSMA6 via the R&S TSMA6-BP Battery
Pack Unit.
To use the R&S TSMA6 with the battery pack, the following steps must be performed.
1. Insert the batteries into the R&S TSMA6-BP.
Figure 5-3: Battery orientation
Note: The R&S TSMA6 may be used only with closed battery cover.
2. Remove the cover cap from the docking connector of the R&S TSMA6.
User Manual 4900.8057.02 ─ 06
Preparing for Use
Connecting Power Supply
23