Mx471B-R Can Module - HBM SomatXR CX23-R User Manual

Connector
pin side of cable
Transducer
CAN bus
database or raw message
§
Including support for CCP/XCP-on-CAN (not in combination with CX23-R/EXRCPU).
CX23-R and EX23-R
Pin Connection
1 Reference pulse 0° (zeroing pulse) (-)
2 Reference pulse 0° (zeroing pulse) (+)
3 f AC+ (for passive inductive transducers)
1
4 Reference voltage Vref (2.5 V) Signal ground
jumper to pin 5
5 Ground cable detect
jumper to pin 4
6 No function
7 Frequency input
f (-)
1
8 Frequency input
f (+)
1
9 Active sensor supply 5...24 V (0 V)
10 Active sensor supply 5...24 V (+)
11 Frequency input
f (-)
2
12 Frequency input
f (+)
2
13 TEDS (-) Signal ground
14 TEDS (+)
Shield Shield
NOTE
Connection between pins 4 and 5 is necessary for all transducers. Note that the
sensor connector must have a connection between pins 1 and 11 for
compatibility with the MX1615B-R module.
5.3.7 MX471B-R CAN Module
Up to four (4) independent CAN bus inputs can be connected to the MX471B-R
module.
Each CAN bus node is electrically isolated from each other and from the power
supply.
a4275-8.0 en HBM: public
MX471B-R
§
●
database only
5 SomatXR hardware
Wire Color
(1-KAB183 or 1-KAB184)
Black
Blue
White/Black
Red/Black
Pink/Black
Yellow/Black
White
Red
Brown
Yellow
Grey
Green
Grey/Black
Green/Black
--
Wiring diagram
125
97