Getting Started; Somatxr Hardware Options - HBM SomatXR CX23-R User Manual

1 Getting started
CX23-R and EX23-R
1.1 SomatXR hardware options
The SomatXR Ultra-Rugged DAQ series is a modular and universally applicable
measurement system. The modules of this family can be individually combined and
intelligently connected according to the measurement task. The distributed operation
makes it possible to position individual modules close to the measuring points,
resulting in short sensor lines.
The SomatXR Ultra-Rugged DAQ series consists of the following modules:
The following ruggedized SomatXR MX modules are currently supported in
the CX23-R interface:
CX23-R data processor: The CX23-R hosts its own secure web-based data
recorder for intuitive and easy-to-use test setup, control, monitoring and data
visualization. This server-based interface supports multiple users, and the
capability to define system access restrictions on a per user basis. To manage
test data, the CX23-R has the capacity to perform a broad range of on-board data
processing. This includes a diverse set of computed channels for defining triggers
and gates for the Somat DataModes™ as well as supporting arbitrarily complex
mathematical computations. The acquired test data is stored in the efficient and
robust SIE file format using a high-speed SATA storage drive. In addition, the
CX23-R provides direct data sourcing for six interfaces including digital inputs and
outputs, three CAN ports, one GPS and one auxiliary port (AUX).
EX23-R Ethernet
supports IEEE1588 PTPv2 transparent clock time synchronization. The EX23-R
supports both IPv6 and IPv4 Internet protocols. Five ports provide Power over
Ethernet (PoE) to support cameras and other low power Ethernet based data
sources. This module is factory configured to work seamlessly with the CX23-R.
MX1601B-R Standard Module (Universal
for DC voltage sources (60 V, 10 V, 100 mV), DC current sources (20 mA) or
current-fed piezoelectric transducers (IEPE, ICP®).
MX1609KB-R Thermocouple
for measuring temperatures.
MX1615B-R Bridge Module (Strain Gage
configurable inputs, including strain gage-based transducers, standardized
voltage and resistance or resistance-based measurements.
MX840B-R Universal
than 16 transducer technologies including one connector compatible with CAN
inputs.
MX411B-R Highly Dynamic Universal
strain gage and inductive bridges, standardized voltage and DC current sources
(20 mA) or current-fed piezoelectric (IEPE, ICP®) and piezoresistive transducers.
MX460B-R Frequency / Counter
digital pulses up to 1 MHz (speed, torque, angle position, displacement, PWM in
general). CX23-R/eDAQXR support is limited in the following aspects. Math
a4275-8.0 en HBM: public
switch: The EX23-R is a ruggedized 10-port Gigabit switch that
Amplifier): Up to 16 configurable inputs
Amplifier: Up to 16 type K thermocouples (NiCrNi)
Amplifier): Up to 16 individually
Module: Up to eight (8) universal inputs for connecting more
Module: Up to four (4) inputs, including
Module: Up to four (4) digital inputs to measure
1 Getting started
13