Somatxr Hardware; Cx23-R Data Processor; Cx23-R Inputs And Outputs - HBM SomatXR CX23-R User Manual

5 SomatXR hardware
Transducer
Digital input, Frequency, Pulse counter, Duty cycle
Digital output
Encoder input
CAN bus
database or raw message
GPS
Camera,
Axis network cameras, via EX23-R
CX23-R and EX23-R
5.1 CX23-R Data Processor
5.1.1 CX23-R inputs and outputs
The CX23-R data processor provides connections for sourcing input data channels
through six connectors - one digital input/output, one GPS and three CAN.
DIO channels
The DIO connector provides pin connections for three sensor input lines, two current
sinking output lines, one power output line and individual shield/ground connections
for all five input and output lines.
Digital input channels
up to ±70 V and support user-defined static upper and lower thresholds in the range
of ±5 V to a resolution of 20 mV. The -3 dB bandwidth is 4 MHz, with start of
attenuation roll off at nominally 1 MHz.
Digital output channels
to ±60V. They are designed to drive LEDs, relays and other indicators and control at
maximum update rates of 20 Hz nominally.
The DIO power supply provides power up to 3 W at user-selectable voltages of 5 V
or 12 V (within ±5% accuracy).
a4275-8.0 en HBM: public
have an input impedance of 10 KΩ, are over-voltage protected
can sink 350 mA to ground and are over-voltage protected up
5 SomatXR hardware
CX23-R Wiring diagram
●
114
●
115
●
129
●
125
●
●
27
via EX23-R
77