Setting Up Somatxr Wireless - HBM SomatXR CX23-R User Manual

CX23-R and EX23-R
2.2 Setting up SomatXR wireless
HBM offers a wireless solution for the SomatXR system using the Sierra Wireless
GX Series, MOXA AWK-4121 or ACKSYS WLg-xROAD devices.
SIERRA WIRELESS GX Series gateway
The Sierra Wireless GX Series cellular gateway is capable of 4G LTE network
connection. A wireless account and SIM card must be obtained from a wireless
service provider. The gateway connects to the CX23-R through Ethernet ports, so
the CX23-R can be remotely controlled by a web-enabled computer through the
cellular network.
Connecting the gateway to a CX23-R
Refer to Sierra Wireless documentation for setting up a SIM card from a 4G LTE
service provider and gateway software.
1. Connect an antenna to the Sierra Wireless gateway.
2. Refer to Sierra Wireless documentation for connecting the gateway to a power
source.
3. Connect the CX23-R to a 10–30V
4. Connect a 1-KAB2106-2 cable between the CX23-R HOST port and the
Ethernet port on the Sierra Wireless gateway.
Configuring the gateway
1. Set up your Sierra Wireless gateway as instructed by your service provider.
2. In a web browser, navigate to the IP address provided by a wireless service
provider to open the CX23-R web interface.
3. In some configurations you may need to change security settings in your
browser to access the CX23-R web interface. Please see the User Manual for
more information.
MOXA AWK-4121 access point
The MOXA AWK-4121 is an industrial 802.11 ab/b/g IP68 Wireless
AP/Bridge/Client. MOXA offers many antenna options to fit various applications and
comes standard with two omni-directional antennas (5/3 dBi, N-type male, 2.4/5
GHz).
a4275-8.0 en HBM: public
2 Setting up the hardware
power supply.
DC
23