Ex23-R Power Pin Assignments; Mxb Modules - HBM SomatXR CX23-R User Manual

5 SomatXR hardware
Connector
pin side of cable
82
5.2.2 EX23-R POWER pin assignments
PIN Description
1 Ground
2 -
3 Power in +
4 Remote switch
5.3 MXB modules
The SomatXR MXB modules are front end data sourcing modules that can be used
as expansion modules with the SomatXR/eDAQXR data processor or the
catmanAP and MX Assistant software applications. They are configurable to
interface to a diverse range of transducers and sensors. Generic features for most
MX modules include precision measurement capabilities using 24 bit ADCs, TEDS
sensor support and multiple digital filtering options. All MXB modules have a similar
back panel with a power connector, two FireWire connectors and one Ethernet
connector.
MXB modules can be connected to a CX23-R module directly or through one or more
EX23-R Ethernet switches. For more information on setting up a system with MXB
modules, see Connecting MX modules to a
The data processor is designed to use Ethernet based PTPv2 protocol (IEEE1588)
for time and data synchronization with MX modules and other peripherals. FireWire
connections between MX modules are available and useful to simplify power
distribution. When FireWire connections are used, timing and data synchronization
between MX modules may or may not be based on the FireWire protocol.
CAUTION
All MXB modules in the system must have an Ethernet connection (either
directly to the data processor or indirectly through an EX23-R). Connecting an
MXB module to any other MXB module using FireWire without both having an
Ethernet connection to the data processor can result in acquired data not being
synchronized to the data processor on one or more MXB modules.
a4275-8.0 en HBM: public
Wire Color
(1-KAB2115 -2)
Black
-
Red
Green
CX23-R.
CX23-R and EX23-R