Mx1601B-R Standard Module (Universal Amplifier) - HBM SomatXR CX23-R User Manual

Connector
pin side of cable
Transducer
Voltage,
60 V, 10 V, 100 mV
Current-fed piezoelectric transducer
(IEPE, ICP®)
CX23-R and EX23-R
Pin Connection
1 Excitation (-)
jumper to pin 11
2 Excitation (+)
3 Voltage input 60 V (+)
4 Signal ground
5 --
6 --
7 Measurement signal (+)
8 Measurement signal (-)
9 --
10 --
11 Sense (-)
jumper to pin 1
12 Sense (+)
13 TEDS (-)
14 TEDS (+)
Shield Shield
NOTE
Pin assignment is different for
measurements
information, refer to the wiring diagrams.
NOTE
Connection between pins 1 and 11 is necessary for all MX1615B-R transducers.
Note that the sensor connector must have a connection between pins 4 and 5 for
compatibility with other MX modules.
5.3.3 MX1601B-R Standard Module (Universal Amplifier)
Up to 16 configurable inputs for DC voltage sources (60 V, 10 V, 100 mV), DC
current sources (20 mA) or current-fed piezoelectric transducers (IEPE, ICP®) can
be connected to the MX1601B-R module.
a4275-8.0 en HBM: public
Strain gage
and Resistance-based measurements
MX1601B-R
5 SomatXR hardware
Wire color
(1-KAB183 or 1-KAB184)
Black
Blue
White/Black
Red/Black
Pink/Black
Yellow/Black
White
Red
Brown
Yellow
Grey
Green
Grey/Black
Green/Black
--
transducers, Resistance-based
inputs. For more
Wiring diagram
●
†
●
108
109
89