Global System Object" For Operating Mode "Remote I/O - Festo CPX-FB36 Instruction Manual

C. EtherNet/IP Objects of the CPX-FB36
C.4.2 "Global System Object" for operating mode "Remote I/O"
Attr. Access Description
no.
1 Get CPX operating mode (bit 0 ... 3)
0: Remote I/O without FEC/CEC
1: Remote I/O with FEC or CEC
2: Remote controller without bus node
3: Remote controller with bus node
CPX expansion (bit 4)
Specifies whether the current CPX expansion
corresponds to the saved CPX expansion.
0: equal
1: unequal
Operator unit (bit 5)
Specifies whether or not an operator unit is
connected.
0: No operator unit is connected
1: Operator unit connected
Force mode (bit 6)
Specifies whether Force is disabled or enabled.
0: disabled
1: enabled
Bit 7: reserved
Tab. C/22: Attributes of the System Object for operating mode Remote I/O (part 1)
C-20
Object class: 132
Instances: 1
This Object is only available in the operating mode Remote I/O.
d
Type
BYTE
Festo CPX-FB36-EN en 1611a English
Function no.
0 (bit 0 ... 3)
0 (bit 4)
0 (bit 5)
0 (bit 6)
0 (bit 7)