Festo CPX-FB36 Instruction Manual page 76

3. Commissioning
3-18
Integrating the CPX terminal into an existing project
The CPX terminal configured and parameterised with the
Festo Maintenance Tool software appears in the "Stu­
dio 5000" software as an Ethernet module.
To integrate this module into an existing project:
1. In the "Controller Organizer" window in the "I/O Configur­
ation" directory, right click on the Ethernet module and
select "Copy" in the context menu.
Fig. 3/13: Copying the Ethernet module
Festo CPX-FB36-EN en 1611a English