Ethernet Link Object - Festo CPX-FB36 Instruction Manual

C. EtherNet/IP Objects of the CPX-FB36
C.2.4 "Ethernet Link Object"
C-12
Object class: 246
Instances: 2
One instance per Ethernet port:
– Instance 1 corresponds to Ethernet port X1
– Instance 2 corresponds to Ethernet port X2
Via the Ethernet Link Object, you can undertake extended
settings for the Ethernet connection (è section 1.3.6).
Attr. Access Description
no.
1 Get Interface Speed
2 Get Interface Status Flags
3 Get Physical MAC address
6 Get/Set Interface Control
– Control Bits
– Forced Interface Speed
Tab. C/10: Network settings with Ethernet Link Object
Examples:
To set Port X1 permanently to 100 Mbit/s, full duplex (Auto-
Negotiation off ), the following values must be written in
Attribute 6, Instance 1: [0002
To activate Auto-Negotiation, the following values must be
written in Attribute 6, Instance 1: [0001
Further details can be found in the EtherNet/IP specification.
d
][0064 ].
h h
][0000
h
Festo CPX-FB36-EN en 1611a English
Type
UDINT
DWORD
ARRAY of
6 USINT
STRUCT of
WORD,
UINT
].
h