Analogue Modules - Festo CPX-FB36 Instruction Manual

B. Address assignment of the CPX terminal
B.1.3 Analogue modules
Module designation
VMPA-FB-PS-... (pressure sensor)
VPPM-...TA-L-1-F... (Proportional pressure regulator valve) VPPM
Analogue module
CPX-2AE-U-I
CPX-4AE-U-I
CPX-4AE-I
CPX-4AE-T (Temperature module for RTD sensors)
CPX-4AE-TC (Temperature module for TC sensors)
CPX-4AE-P-D10 (Pressure sensor module 0 ... 10 bar)
CPX-4AE-P-B2 (Pressure sensor module –1 ... 1 bar)
CPX-2AA-U-I
1) In the operator unit or in the hardware configuration of the programming software.
2) Depending on the configuration
Tab. B/5: Address assignment of the analogue module
Festo CPX-FB36-EN en 1611a English
The address assignment within the individual CPX analogue
I/O modules can be found in the description for the analogue
I/O modules (è P.BE-CPX-AX-...).
Module Assigned address
1)
indicator space
Inputs
MPA-P 1x 16 bit
1x 16 bit
2AI 2x 16 bit
4AI 4x 16 bit
4AI-I 4x 16 bit
4AI-T 2x 16 bit
or
4x 16 bit
4AI-TC 4x 16 bit
4AI-P-D10 4x 16 bit
4AI-P-B2 4x 16 bit
2AO –
Outputs
–
1x 16 bit
–
–
–
–
2)
–
–
–
2x 16 bit
B-9