Festo CPX-FB36 Instruction Manual page 95

4. Diagnostics
Festo CPX-FB36-EN en 1611a English
In the following sections, the statuses of the LED displays are
represented as follows:
lit; flashing;
Normal operating status
During normal operation, the following LEDs light up green.
The SF LED does not illuminate. The M-LED only illuminates
with the setting "System start with stored parameterisation
and stored CPX expansion" (è function number 4402).
LED indicator
MS PS
NS PM
TP1 SF
M
TP2
1) Steady light: Ready for data transmission
Flashing: Data transmission ongoing
2) Lights up only if system start is activated with saved parameteri­
sation and saved CPX expansion.
Tab. 4/2: Normal operating status
off;
These LEDs light up
green:
– MS
– NS
1)
– TP1/2
– PS
– PL
The red LED (SF) does
not illuminate.
The yellow LED (M) is
2)
lit.
operating
status
Normal
4-5