Festo CPX-FB36 Instruction Manual page 110

A. Technical appendix
Power supply
Operating voltage supply U
Intrinsic current consumption at nominal operating
voltage 24 V from operating voltage supply U
Separation of network interface from operating
voltage supply U
EL/SEN
Load voltage supply U
Mains buffering time
Tab. A/2: Technical data – power supply
Network-specific
Connection technology
Protocol
Specification
Transmission rate
Minimum cycle time (RPI)
Maximum data field size (input/output size)
Remote I/O
Remote controller
Crossover detection
Cable type
Transmission class
Maximum cable length
1)
Based on the Ethernet protocol IEEE 802.3
2)
Dependent on the setting of the DIL switch 2 and the revision of the bus node
Tab. A/3: Technical data – network-specific
A-4
EL/SEN
EL/SEN
VAL/OUT
24 _ 25 %
[V DC]
[mA] Typ. 100 (internal electronics)
Galvanic
24 _ 10 %
[V DC]
[ms] 10
2× socket, M12, D-coded, 4-pin
EtherNet/IP or Modbus TCP
IEEE 802.3u (100Base-TX)
[Mbit/s] 10/100 (full duplex/half duplex)
[ms] 1
[byte] 64 I/64 O
[byte] 8 I/8 O, 16 I/16 O, 32 I/32 O or
2)
64 I/64 O
Auto-MDI/MDI-X
Ethernet twisted pair cable,
screened
Category Cat 5/Cat 5e
[m] 100
Festo CPX-FB36-EN en 1611a English
1)