B.4.2 System Object (For Operating Mode Remote I/O) - Festo CPX-FB32 Electronic Manual

B. Ethernet/IP Objects of the CPX−FB32

B.4.2 System Object (for operating mode Remote I/O)

Attr. Access Description
no.
1 Get CPX operating mode (bit 0...3)
0: Remote I/O without FEC
1: Remote I/O with FEC
2: Remote Controller without bus node
3: Remote Controller with bus node
CPX equipment status (bit 4)
Specifies whether the current equipment fitted to the
CPX corresponds to the saved CPX equipment status.
0: equal
1: not equal
Handheld (bit 5)
Specifies whether or not a handheld is connected.
0: Handheld not connected
1: Handheld connected
Force mode (bit 6)
Specifies whether Force is blocked or enabled.
0: blocked
1: enabled
Bit 7: Reserved
2 Get Fail safe
Specifies whether Fail safe is active or inactive.
0: inactive
1: active
System Idle mode
Specifies whether Idle mode is active or inactive.
0: inactive
1: active
B−16
Object class: 132
Instances: 1
This Object is only available in the operating mode Remote
I/O.
Type Function
no.
BYTE 0 (bit 0...3)
0 (bit 4)
0 (bit 5)
0 (bit 6)
0 (bit 7)
BYTE 1 (bit 0, 1)
1 (bit 2, 3)
Festo P.BE−CPX−FB32−EN en 0605NH