Festo CPX-FB36 Instruction Manual page 65

3. Commissioning
Festo CPX-FB36-EN en 1611a English
Integrate participants into the project and configure
them
Configuration of the bus node can only take place if there is
no online connection to the controller.
1. Terminate an existing online connection to the higher-or­
der controller:
[Communications] , [Go Offline]
2. Open "Select Module Type" dialogue:
In the "Controller Organizer" window in the "I/O Configur­
ation" directory, click on "Ethernet" with the right mouse
button and select "New Module" in the context menu.
Fig. 3/4: Context menu for "New Module..."
3-7