Unpack The Realpresence Collaboration Server (Rmx) 2000 - Polycom RMX 2000 Hardware Manual

Unpack the RealPresence Collaboration Server (RMX)
2000
Observe the following procedures when unpacking the RealPresence Collaboration Server (RMX) 2000.
To unpack and lift the RealPresence Collaboration Server (RMX) 2000:
1 When you receive the RealPresence Collaboration Server (RMX) 2000 packing case, inspect the
equipment for damage and verify that the components match the packing slip.
2 Open the top cover of the packing case, and verify all listed accessories below.
Boxes are placed on the top Stratocell® and contain the following accessories kits:
 Installation Accessories
 Rack Installation Accessories
 Optional - ISDN Package.
3 Write down the Collaboration Server serial number from the sticker on the back of the unit. You will
need this for product registration later in the process.
4 Lift the RealPresence Collaboration Server from the box, and place it on a flat surface or in a rack.
Remove the packaging materials prior to positioning the RealPresence Collaboration Server.
Polycom, Inc.
Prepare for Installation
23