Polycom RMX 2000 Hardware Manual page 59

RealPresence Collaboration Server (RMX) 2000 Components and Components Replacement
3 Push the ejector levers to their fully closed position.
4 Tighten the captive screws on each side of the rear panel of the card, securing the RTM ISDN card
to the RMX.
5 Connect the RJ-45 terminated PRI cables into any PRI port.
6 Turn ON the RMX.
7 Login on to the RealPresence Collaboration Server Web Client.
When a new ISDN card is installed you are required to do the following:
● Update your licence. For more information see First Entry Power-up and Configuration in the
RealPresence Collaboration Server (RMX) 1800/2000/4000 Getting Started Guide.
● In the ISDN Network Services define a New ISDN Network Service. For more information, see
Adding/Modifying ISDN Network Services in the RealPresence Collaboration Server (RMX)
1800/2000/4000 Administrator's Guide.
Polycom, Inc. 59