Install The Realpresence Collaboration Server (Rmx) 2000; (Optional) Install Rtm Isdn Card On The Realpresence Collaboration Server (Rmx) 2000 - Polycom RMX 2000 Hardware Manual

Realpresence collaboration server (rmx) 2000
Hide thumbs Also See for RMX 2000:
Table of Contents

Advertisement

Install the RealPresence Collaboration
Server (RMX) 2000
The following procedures have to be performed to successfully install the RealPresence Collaboration
Server (RMX) 2000 in your site:

(Optional) Install RTM ISDN Card on the RealPresence Collaboration Server (RMX) 2000

Mount the RealPresence Collaboration Server (RMX) 2000 in a Rack
Connect Cables to the RealPresence Collaboration Server (RMX) 2000
Note: Considerations for installing RealPresence Collaboration Server (RMX) 2000
To maximize conferencing performance, especially in high bit rate call environments, a 1Gb
connection is recommended for RealPresence Collaboration Server (RMX) 2000.
The equipment must be installed by a trained service person.
(Optional) Install RTM ISDN Card on the RealPresence
Collaboration Server (RMX) 2000
If the ISDN option was purchased with your RealPresence Collaboration Server (RMX) 2000, the ISDN card
is shipped separately and must be manually installed into the rear of the RealPresence Collaboration Server
(RMX) 2000. It is recommended that you install the ISDN card before the RealPresence Collaboration
Server (RMX) 2000 is placed in a rack.
As a first installation, the RTM ISDN card must be installed in the top slot of the RMX chassis. The RTM
ISDN card must be seated opposite to an MPMRx card located in the top slot on the front of the RMX.
An RMX Software License is included with the ISDN card and must be registered as part of the Product
Registration and Product Activation. See Register Product in the RealPresence Collaboration Server
(RMX) 1800/2000/4000 Getting Started Guide.
To remove the blank cover from the rear of the RealPresence Collaboration Server (RMX)
2000:
1 Ensure that the power switch/circuit switch on the RealPresence Collaboration Server (RMX) 2000
is turned OFF (O).
2 Unscrew the captive screws on the rear panel of the RealPresence Collaboration Server (RMX)
2000 that secure the blank panel.
3 Use the metal ejector levers to pull off the blank panel.
Polycom, Inc.
29

Advertisement

Table of Contents
loading

Table of Contents