RealPresence Collaboration Server (RMX) 2000 Components and Components Replacement
Note: RTM LAN card and MPMRx card
An RTM LAN card must connect directly to an MPMRx card in the opposite front slot.
3 Push the RTM LAN card firmly into the media card, making sure it is properly seated in its slots.
4 Ensure that the metal ejector levers are fully retracted into their housings.
5 Tighten the captive screws on the rear panel of the RMX 2000 that secure the RTM LAN card.
6 Reconnect the cables.
7 Turn ON the RMX 2000.
Polycom, Inc.
61