Installation Precautions; Unpack The Realpresence Collaboration Server (Rmx) 1800 - Polycom RealPresence RMX 1800 Hardware Manual

Collaboration server
Hide thumbs Also See for RealPresence RMX 1800:
Table of Contents

Advertisement

● Install the heaviest components on the bottom of the rack first, and then work up.
● Allow the power supply units to cool before touching them.

Installation Precautions

When handling electronic components, standard anti-static precautions must be observed:
● Wear a grounding strap
● Keep components in anti-static bags, when not installed in the RealPresence Collaboration Server
(RMX) 1800.
● The number of power units (maximum two, default one) varies by your product package.
The following precautions should be followed with regards to installation of the RealPresence Collaboration
Server (RMX) 1800:
● Use a regulating uninterruptable power supply (UPS) to protect the RealPresence Collaboration
Server (RMX) 1800 from power surges and voltage spikes, and to keep your MCU operating in case
of a power failure.
● Place the RealPresence Collaboration Server (RMX) 1800 on a hard, flat surface such as a desktop,
or mount it on a 19" rack.
● The airflow of the RealPresence Collaboration Server (RMX) 1800 is from front to back. Be sure that
the areas in the front and rear side of the system are clear for proper ventilation.
Warning: Warranty void if the seal is broken
The RealPresence Collaboration Server (RMX) 1800 is a sealed system, so breaking the seal and
opening the chassis voids the warranty.
Unpack the RealPresence Collaboration Server (RMX)
1800
Perform the following steps to unpack and lift the RealPresence Collaboration Server (RMX) 1800.
To unpack the RealPresence Collaboration Server (RMX) 1800:
1 When you receive the RealPresence Collaboration Server (RMX) 1800 packing case, inspect the
equipment for damage and verify that the components match the packing slip.
2 Open the top cover of the packing case.
Boxes are placed on the top Stratocell
USB key, one DB-9 Serial cable and one printed ISDN license.
Make sure that the box contains all the required parts.
Polycom, Inc.
Prepare for Installing RealPresence Collaboration Server (RMX) 1800
®
and contain one AC power cable, two ethernet cables, one
18

Advertisement

Table of Contents
loading

Table of Contents