Realpresence Collaboration Server (Rmx) 2000 Rear Panel Leds; Rtm Ip Card - Polycom RMX 2000 Hardware Manual

RealPresence Collaboration Server (RMX) 2000 Components and Components Replacement

RealPresence Collaboration Server (RMX) 2000 Rear Panel LEDs

This section introduces LEDs on the RealPresence Collaboration Server (RMX) 2000 rear panel.

RTM IP Card

The following LEDs appear on the RTM IP card.
:
RTM IP LEDs
Component
LAN (1-3)
10/100 ShMG
SLOT (1-4)
ShMG
STANDBY
Polycom, Inc.
LED Name LED Color
LNK Green
1 Gb Green
LNK Amber
100 Green
1Gb (1-4) Amber
LNK (1-4) Green
ERR Red
ACT Amber
RDY Green
HS Blue
Green
Description
ON with an active network connection, flickers with Packet
activity.
ON with a 1Gb online connection.
ON with an active network connection, flickers with Packet
activity.
ON when active network is
10/100Mb.
ON with a 1Gb online connection, flickers with Packet
activity.
ON with an active network connection, flickers with Packet
activity.
ON - Major error on RTM card.
Flashes - During system startup.
ON - Packet flow to and from the MCU chassis.
Flashes - During system startup.
ON - RTM IP card has successfully completed startup.
Flashes - During system startup.
Hot swap not supported.
OFF - Normal.
Flashes for a second during initial power up.
When the user in the RMX Manager/ RealPresence
Collaboration Server Client presses the System Shut Down
(red) button in the Hardware Monitor tool bar, the system
should enter a standby mode and the LED turns ON. Only
the media and control unit cards are in a standby mode.
Shelf Manager remains active.
Turn the system OFF/ON to exit the standby mode.
44