Polycom RMX 2000 Hardware Manual page 27

Realpresence collaboration server (rmx) 2000

Hide thumbs Also See for RMX 2000:

Table of Contents

Detail of front rack spacer assembly (left rail runner is shown here)

Note: Top hole of the rack spacer

On the RMX 2000, the top hole of the Rack Spacer must remain empty as it is required for fixing the

RMX to the rack post.

3 Adjust the telescopic rack rail runner to the rack opening and mount it onto the marked position of

the rear post, as described in Step 2.

Detail of rear RMX 2000 rack spacer assembly

4 Repeat Steps 2 and 3 for the right rack rail runner.

5 Install the flat head screw (5), flat washer (6) and nut spring (7) in the middle of the telescopic rack

rail runner for added stability as shown in the figure below.

Polycom, Inc.

Prepare for Installation

Table of Contents