Polycom RMX 2000 Hardware Manual page 50

RealPresence Collaboration Server (RMX) 2000 Components and Components Replacement
2 Partially Open - The ejector levers are partially open and the blue HS LEDs on the card and the
Control Unit are flashing. When the blue LEDs are constantly lit the card is in a powered-down mode
and can be safely removed.
3 Fully Open - The ejector levers are in the fully open position. In this position the card is released
from the MCU housing and can be removed.
To open and close the ejector levers:
● Unlocking the Lock Catch - With your thumb on the handle (2) and your index finger on the lock
catch (1), pinch thumb and finger together while lifting the handle away from the chassis.
Note: Initiated process cannot be terminated
Once the removal sequence is initiated the process cannot be terminated, and the HS led flashes
when activated.
● Closing the Lever - With your thumb on the handle (2), press the lever against the panel until it clicks
into place.
Polycom, Inc. 50