System Options - Reference Information - Sam4s ER-920 Operator's And Programming Manual

System Options - Reference Information

#
2
6
14
17
18
21
21
22
142 • P-Mode Programming
Option
Clerk sign on method is Direct Entry
or Code Entry
Allow the post tender function
Hash is NORMAL or NON-ADD
Split Pricing is deactivated?
Enable Direct Multiplication
Display add price of linked item?
Allow Canadian round on subtotal?
Allow Canadian round on cash?
Description
For direct entry, enter the numeric clerk
code and press the CLERK key. For
code entry, press the CLERK key, enter
the clerk code and press the CLERK
key.
Select Y to allow re-tendering should a
second change calculation become
necessary. Re-enter the tendered amount
and press the CASH key to show the
new change computation.
Normal Hash adds to all totals except the
gross and net sales totals on the financial
report.
Non-add Hash does not add to any
totals, except the HASH total on the
financial report.
If N, both multiplication and split pricing
calculations can be done with the
X/TIME key. If Y, only multiplication
can be done with the X/TIME key.
If Y, you can multiply preset items by
simply entering the quantity, then
pressing the preset PLU key.
When Y, the customer display shows a
total of the item and linked item. For
example, if PLU is $1.00 and is linked to
PLU2, which is $0.25, the display will
show $1.25.
Canadian rounding rounds as below:
Note: At software version 1.036, the flag
was changed to read "Canadian" rather
than "Swedish" rounding. The rounding
rules are the same. For penniless
Canadian transactions, see "SUBTOTAL
- Function Key Options" on page 174 to
display the rounded subtotal.
SAM4s ER-900 Series Operator's & Programming Manual v.1.28
.00 - .02 = .00
.03 - .07 = .05
.08 - .09 = .10