Reset; Reset All Settings; Reset Password; Reset Ip Address - Black Box 37687 User Manual

Reset

This allows the user to reset a number or all of the settings stored in FLASH which constitute
the server's configuration.
The following settings may be reset:
1. Reset all settings to factory defaults.

2. Reset password.

3. Reset IP address.

4. Reset product name.

5. Reset Ethernet address.

q Quit.

Reset all settings

This clears the entire permanent database in FLASH. When the server runs the firmware it
will report a permanent database error and set all of the configurations to their default
settings.
Reset password
This is useful if the password is lost or forgotten, it will set the password back to iolan.
Reset IP address
This will reset the IP address of the communications server.
Reset product name
This option changes the name displayed in the bottom left corner of the menu screen, it is not
intended for use outside the factory.
Reset Ethernet address
Do not attempt to enter the Ethernet address unless the unit's configuration has become
completely corrupt. The Ethernet address is recorded on the base of the unit and should
never be changed.

Quit

This will exit the bootstrap menu and cause the firmware stored in FLASH to be booted.
Terminal Server User Guide
Diagnostics
Page 191