Table of Contents
Advertisement
reboot
Syntax:
reboot
Description:
This function reboots the terminal server. Admin level is required.
resume
Syntax:
resume <session number>
Description:
This allows user to resume an established connection if there are multiple sessions going.
rlogin
Syntax:
rlogin [host] [port]
Description:
This function allows the user to make an rlogin connection to the specified host machine. If
the port number is not specified then it defaults to 513.
save
Syntax:
save config
Description:
This function allows the user to save the Terminal Server configuration to a specified host
machine and file. The configuration is saved to the specified Boot Host and put into the file
name described in the Init File parameter (see
Server uses the TFTP protocol to save and load the file.
Because of a restriction in most TFTP implementations the file must exist before it can be
written. Admin level is required.
Example:
To create the file under Unix type:
touch filename
chmod 666 filename
Terminal Server User Guide
Command descriptions
set server
Page 164
on page 166). The Terminal
Advertisement
Table of Contents
