Electrical Safety Guidelines; Connecting Up Your Rack Terminal Server; Disconnecting Your Rack Terminal Server - Black Box 37687 User Manual

Electrical Safety Guidelines

Warning
Electrical current from power, telephone and communications cables may be hazardous.
Connect and disconnect cables in the order detailed below when installing, moving or
opening the covers of this product or attached devices.
During periods of lightening activity, do not connect or disconnect any cables or perform
installation, maintenance or configuration.

Connecting up your Rack Terminal Server

Making connections to your Rack Terminal Server should be performed in the following
sequence:
1. Switch off the power source.
2. Connect attached devices
3. Connect the supply end of the DC supply cable observing the correct polarity.
4. Connect the supply cable to the Rack Terminal Server and tighten the securing collar.
5. Switch on the supply.
6. Switch on the Rack Terminal Server.

Disconnecting your Rack Terminal Server

1. Switch off the Rack Terminal Server
2. Switch off the power source.
3. Loosen the securing collar and disconnect the supply cable to the Rack Terminal Server.
4. Disconnect the supply end of the DC supply cable (if moving the unit).
5. Disconnect attached devices.
Your Rack Terminal Server is now ready to be moved.
Terminal Server User Guide
Electrical Safety Guidelines
Page 173