Table of Contents
Advertisement
IP address
This section of the menu deals with remote access and modem sessions only. The
parameters are as follows:
Terminal Server User Guide
Port setup menu
Option
Description
Src
This is the source IP address of the port for PPP/SLIP connections. If
blank, the Terminal Server IP address is used.
Dst
This is the destination IP address of the PPP/SLIP connections. If blank,
the remote host must supply the IP address. If filled in, you designate an
assigned IP address to loan the remote host.If the secure field on the Port
Menu is No, this can be overridden by the incoming host.
Mask
This is the subnet mask which controls the range of IP addresses
accessible from the port (when using remote access).
Page 130
Chapter 10 The menu interface
Advertisement
Table of Contents
