Terminal Server User Guide
Terminal Port Configuration
Menu
option
Description
Remote Port
This corresponds to Telnet service on the remote host and must be set to
the standard 23 (or 513 for rlogin).
Monitor DSR
You can set this field to Yes if you wire the terminal's DTR signal pin 20
(DB25) to the Terminal Server's DSR signal pin 3 on the RJ45 connector
( see
Appendix D Cabling
the terminal off, it will reset the Terminal Server port, which tells the Unix
host to kill the user's processes.
for DB25 pin assignments). When you turn
Page 53
Chapter 3 Terminals on mutli-user systems