The Host
On systems where LPD or a binary for ioland is not available, or is found to be unreliable due
to limitations in the OS, RCP provides a useful, if limited, alternative method for printing. The
port/group of ports must be configured to listen to the RCP port, which is port 514. Users can
then copy files to the server using the following command syntax:
rcp <file> <server>:tty [port #]
It is worth noting that the RCP will fail if the port (or all the ports in the hunt group) is in use
when the RCP command is attempted. If you wish to use RCP as part of a System V print
spooler script, it is essential that the script checks the return status of the RCP command.
Terminal Server User Guide
Using RCP
Field
Description
Mode
The port of the terminal server will operate in a raw TCP/IP
mode.
Local port
The INETD process running on the terminal server for this
port is listening for TCP/IP connections on TCP port 514 (this
is the RCP service number).
Page 106
Chapter 8 Printing