Table of Contents
Advertisement
4. Select the Save & Exit field and press the Enter key. Other options are Quit & Exit, which
does not save the changes before exiting this menu, Values, which will display the
optional values for this field if available, and Cancel, which will take you back to this
screen for more editing.
5. You have now set up the unit with a new IP address. This should be confirmed with the
message:
IP CHANGED—PLEASE REBOOT
6. Reboot the communications server to activate the new IP address using the reboot
command. The IP address and/or subnet mask are the only parameters that when
changed necessitate rebooting.
Terminal Server User Guide
The Menu System
Page 43
Chapter 2 Installation
Advertisement
Table of Contents
