Table of Contents
Advertisement
Terminal Server User Guide
Access menu
Parameter
Maximum Login Attempts
Login Timeout
Disconnect Probe
Log Username
Log Power Up/Down
Log User Login/Logout
Log Port Connect/
Disconnect
Log User Service Start/
Stop
Description
The maximum number of login attempts a user is allowed
before the line is reset. For modem users the control line DTR
is toggled, the port is disabled for 3 seconds. Default is 3.
This time defines the maximum time in seconds for the user to
enter authentication information, once login time-out is
exceeded the line is reset.Default is 0.
An option to keep the per port authentication connection up
during the clients' session. Default is Yes. This allows a user
connect time to be measured by a simple 'do nothing' telnet
session.
The logger's user name for gaining access to the log file on
the host. Log File The pathname of the activity log file.
Logs port connection status to the log file (for example, for
Dial-in users). Default is No.
Logs a message to inform the host when the Terminal Server
is powered up and when rebooted from software. This logs an
'I am alive' message every five minutes. Default is No.
Record users logging into authentication host on the log file.
Also records failed login attempts. Default is No.
Logs starts and stops of PPP or SLIP. Default is No.
Page 143
Chapter 10 The menu interface
Advertisement
Table of Contents
