Table of Contents
Advertisement
Reverse Telnet Port Configuration
This setup is used when you need to access a serial port from the network. For example you
might want to collect data from a serial device such as a barcode scanner, POS terminal, etc.
Or you can tie a login to a specific Unix tty device (using ioland). For Unix you use the utility
ioland. For Windows ® system consult the website.
The following fields are important:
Terminal Server User Guide
Reverse Telnet Port Configuration
Fields
Description
Keys
Set all your Keys to ^@.
Access
Set this field to Remote. This sets the port of the terminal server to
listen for connections coming from the network. There will be an
INETD process running on the terminal server that does the listening.
You can check on the status of this process by looking at the Netstat
screen of the terminal server's Stats menu.
Mode
Set this field to Raw.
Local Port
The INETD process running on the terminal server for this port is
listening for TCP/IP connections on TCP port 10006 (for port 6).
Page 112
Chapter 9 Other devices setup
Advertisement
Table of Contents
