Table of Contents
Advertisement
Download
It is possible that when trying to download a new version of firmware over the network that
when the FLASH is being programmed it can become corrupt. In the unlikely event of FLASH
corruption it is possible to download new firmware via the FLASH bootstrap code.
Ethernet Interface
You will be prompted to accept or change the following parameters:
Server Ethernet address.
Server IP address.
Host IP address (from which the download file will come).
Full path and file name of the down-loadable firmware file.
When the settings have been correctly entered the type of Ethernet interface required can be
set, this needs to be selected manually and will not be configured automatically.
Also note that this feature is a backup and normally firmware should be downloaded using
the options included in the firmware itself, allowing updates etc. to be downloaded from
anywhere on the network.
Ensure the server and host are on the same physical network. The bootstrap code does not
support routing.
Terminal Server User Guide
Diagnostics
Page 190
Advertisement
Table of Contents
