Flow control
This section defines the various flow control options used by the Terminal Server. This
section is always used. The parameters are:
Terminal Server User Guide
Port setup menu
Option
Description
Flow Ctrl
This field defines which method of flow control to be
used by this port, either XON/XOFF, HARDWARE,
BOTH, none or WANG. To use HARDWARE flow
control the correct cable must be used (see
Appendix D
designed for WANG terminal flow control applications.
The default is to use XON/XOFF.
Input Flow
This field allows you to define if the input flow control is
to be used. Default is Enabled.
Output Flow
This field allows you to define if the output flow control
is to be used. Default is Enabled.
Page 129
Cabling. WANG is a special option
Chapter 10 The menu interface