Table of Contents
Advertisement
Host Address menu
Your Terminal Server uses the information entered on the Host Address Menu to form an
internal host table. The user can then use the host name in any of the Terminal Server
functions or menus.
The parameters are as follows:
Kill command
The kill command resets the port but keeps the previously defined configuration. This is used
when you change certain parameters or for when ports get stuck.
Terminal Server User Guide
Host Address menu
Parameter
Description
Host name
This field specifies local name you want to give a particular host on the
network.
IP Address
This field defines the IP address of the host designated above.
Page 146
Chapter 10 The menu interface
Advertisement
Table of Contents
