Table of Contents
Advertisement
Terminal Port Configuration
This is the setup for making a terminal connect to a designated Unix host login prompt
automatically.
The following fields are important:
Terminal Server User Guide
Terminal Port Configuration
Menu
option
Description
Access
Set this field to Local. This tells the terminal server port to listen for data
on the RS-232 side.
Mode
With this field set to telnet, the port will operate in telnet mode (or raw for
rlogin). Most systems will use telnet.
Connection
Set this field to Initiated and the port will establish a TCP/IP connection to
a specified host only after receiving a <CR> on the RS-232 port. If you
set this field to none, then the user of this port will see the menu system
when the terminal is powered on.
Host
Use this field to define which host computer you want the port to
automatically connect to when using Initiated connections. Use the host's
IP address or if you setup the Host Address Menu, you can use a name.
Page 52
Chapter 3 Terminals on mutli-user systems
Advertisement
Table of Contents
