Table of Contents
Advertisement
The Menu System
You should now be at the Command Line Interface (CLI) of the Terminal Server as
designated by the local> prompt. If you would like to continue in CLI mode refer to
A Command Line
1. Set the terminal emulation type and begin using the menus.
The following are the terminal options:
ansi, dumb, vt100, wyse50, wyse60, tvi925, ibm3151, vt320, falco50, hp700
2. The default setting is 'dumb'. To set the menu interface to your emulation simply type set
term with your option.
Example:
local> set term ansi
3. To switch from the command line interface to the menu interface, at the local> prompt
enter:
set menu
Terminal Server User Guide
The Menu System
Interface, but we recommend the menu system.
Note
For Falco50 type local> set term falco
Page 37
Appendix
Chapter 2 Installation
Advertisement
Table of Contents
