Table of Contents
Advertisement
The Connections Menu should now be displayed.
This menu displays the current state of the four possible connections. There are no active
connections.
The firmware version of Terminal Server is located on the lower left hand portion. The
wording 'REMOTE-ADMIN' in the upper right signifies you are remotely telneted into
Terminal Server (and will read 'Terminal: 1' if you are using a terminal/PC into port 1.)
The keys used to move about in the menus depend on the terminal emulation you are using.
The arrow keys should all work. The TAB key is very important for moving between fields.
Backspace and DEL should work, but depend on the emulation.
ESC (the escape key) will move you back one menu.
An accelerator key can be used to jump to an option within a menu and is the first letter of the
option.
Terminal Server User Guide
The Menu System
Note
If there is a problem with your emulation, you can try a different
emulation mode. See
Appendix B
information.
Page 38
Troubleshootingfor more
Chapter 2 Installation
Advertisement
Table of Contents
