Table of Contents
Advertisement
copy
Syntax:
copy <source port> <destination> [destination]...
Description:
This command copies one port setup to another allowing easy setup if the ports are the same
configuration. Administrative level is required to change. Note that multiple destination ports
can be specified separated by spaces.
dial
Syntax:
dial
Description:
This command shows the status of the dial-out interface and would be used for monitoring
dial-out connections.
disconnect
Syntax:
disconnect <session-number>
Description:
This command allows a user to disconnect (close) one or all of their existing TCP
connections.
exit
Syntax:
exit
Description:
This function causes the user to exit the Terminal Server, closing down any sessions and
resetting the port. Some configuration parameters only come into effect after the user has
exited and re-entered Terminal Server (e.g. the name field).
facreset
Syntax:
facreset
Description:
This function will reset all parameters back to factory defaults. This option requires
confirmation.
gateway
Syntax:
gateway <[add dest gate net][delete dest]>
Description:
This function allows the administrator to alter the gateway routing table. New gateways can
be defined by using the add function, and gateways removed using the delete function.
When adding, admin level required to change.
Terminal Server User Guide
Command descriptions
Page 162
Advertisement
Table of Contents
