Tftp Commands; Set Server Tftp; Hosts Commands; Add Host - Black Box Terminal Server User Manual

TFTP Commands

Set Server TFTP

Description Configures the Terminal Server's TFTP client settings.
User Level Admin
Syntax
Options

Hosts Commands

Add Host

Description Adds a host to the Terminal Server host table.
User Level Admin
Syntax
Options

Delete Host

Description Deletes a host from the Terminal Server host table.
User Level Admin
Syntax
Option

Set Host

Description Configures a host in the Terminal Server host table.
User Level Admin
Syntax
Options

Show Hosts

Description Shows the Terminal Server host table.
User Level Normal, Admin
Syntax
set server tftp [retry <integer>] [timeout <integer>]
retry
The number of times the Terminal Server will attempt to transfer (using TFTP) a file
to/from a host. Enter a value between 0 and 5. The default is 5. A value of 0 (zero)
means that the Terminal Server will not attempt a retry should TFTP fail.
timeout
The time, in seconds, that the Terminal Server will wait for a successful transmit or
receipt of TFTP packets before retrying a TFTP transfer. Enter a value between 3
and 10. The default is seconds.
3
add host <hostname> <ip_address>
<hostname>
The name of the host.
<ip_address>
The host IP address.
delete host <config_host>
<config_host>
You can see a list of hosts that can be deleted by typing
set host <config_host> <ip_address>
<config_host>
The name of the host.
<ip_address>
The host IP address.
show hosts
Network Commands
.
delete host ?
Command Line Interface 109