Software Setup And Commissioning; How To Setup Or Change The Touchscreen Panel Configuration; How To Calibrate The Touchscreen - Honeywell Touchpoint Pro Technical Handbook

7 Software Setup and Commissioning

Once the system is fully initialised, Administrators and Engineers can calibrate the Touchscreen (if required) and they
should confirm the Panel Configuration settings as follows:

Selectable Backlight Duration:
o
10 Seconds
o
0.5 to 60 minutes in logical increments
o
Always On

System Purpose Label

Customer Name

Customer Site

Hardware Version

Print Active Events (Enabled / Disabled)

7.1 How to Setup or Change the Touchscreen Panel Configuration:

1. Login as an Administrator or Engineer.
2. From the System Status screen select the Tool Box icon then Global Settings.
3. Select Panel Configuration:
4. Click on a button to change its setting. Most are self-explanatory, but the Calibrate Touch Panel and Print Active
Events options are described below.

7.2 How to Calibrate the Touchscreen

Recalibrate the Touchscreen if it does not respond correctly when touched. This process should take less than a minute but
can only be performed at the Touchscreen.
Calibration must be fully completed once started as there is no option to abort the process.
To recalibrate the Touchscreen:
1. Login as Engineer or Admin
2. Select Tool Box>Global Settings>Panel Configuration>Calibrate Touch Panel
3. Follow the instructions, using a finger or soft stylus to touch each panel corner in turn
4. Finally touch the panel centre to exit
Note: The Fault LED may show if calibration is started but not completed, but will stop when calibration is fully completed.
Note: Screen calibration does not time out even when the backlight or UI times out, and user commands will not be available
until calibration is fully completed. You must complete the Touchscreen calibration first, and then you can carry on with other
activities.
Part. No. 2400M2501_6
SETUP and COMMISSIONING
Figure 70. Panel Configuration Screen
56
Touchpoint Pro
Technical Handbook