Honeywell Touchpoint Pro Technical Handbook page 113

12.5.3 Buzzer Activation Setting
Selects the events on which the buzzer will sound.
12.5.4 Password Accept Button
This button restricts use of the Accept button to authorised users. If Enabled, users must log in to Accept events such as
alarm and fault indications using the front panel push button.
Default is Disabled.
12.5.5 Password Reset Button
This button restricts use of the Reset button to authorised users. If Enabled, users must log in to Reset alarms using the
front panel push button.
Default is Enabled.
Part. No. 2400M2501_6
CONFIGURATION
Figure 83. Select Buzzer Screen
106
Touchpoint Pro
Technical Handbook