Honeywell T8205B Product Data

Honeywell T8205B Product Data

Electronic pool, spa control systems. setpoint panels and sensor assembly

Advertisement

Spa Control Systems; T8205A,H, TS8205A Control
Modules; Q8205A-C Setpoint Panels and Sensor Assembly
T8205C
TS8205B

APPLICATION

T8205B,C and TS8205B,C Electronic Pool and Spa Control
Systems are used in pool, spa, and hot tub applications to
control water temperature. T8205B,C and TS8205B,C Control
System components include a T8205A,H or TS8205A Control
Module and Q8205A-C Setpoint Panel. Sensor Assembly is
purchased separately. The T8205A and TS8205A Control
Modules and Q8205A-C Setpoint Panels can be purchased
separately. The T8205H Control Module is for use with heat
pump systems only. Q8205A-C Setpoint Panels can be used
for remote applications.
Copyright © 1998 Honeywell Inc. • All Rights Reserved
T8205B,C, TS8205B,C Electronic Pool,

FEATURES

• T8205 requires 24 Vac power supply; TS8205 is used in
a 750 mV self-generating system.
• T8205B,C and TS8205B,C include an electronic control
module and setpoint panel packaged together to
simplify installation. The sensor must be ordered
separately.
• T8205A and TS8205A Control Modules are used with a
T8205A
sensor and Q8205A-C Setpoint Panel.
• T8205H Control Module is for use with heat pump
systems only and has 1/4 in. quick connect terminals.
• Module controls within 1.5°F (0.8°C) at setpoint of
106°F (41°C).
• Models available for single control or dual control of
combination pool and spa.
• Isolated relay contacts in electronic control modules
operate gas control or ignition module.
Q8205A
• Male quick-connect wiring terminals provided on
electronic control modules.
• Sensor with 3/16 in. female quick connects on 42 in.,
48 in., 50 in., or 96 in. leadwires can be directly
immersed or mounted in well.
• Setpoint panel can be remotely mounted.
• Plastic potentiometers and selector switches provide
increased protection from humidity and chlorine.
• Combination of 1/4 in. and 3/16 in. quick connect
terminals provide ANSI miswiring compliance, except
T8205H Control Module.
Application ........................................................................... 1
Features .............................................................................. 1
Specifications ...................................................................... 2
Ordering Information ........................................................... 2
Installation ........................................................................... 5
Settings ............................................................................... 7
Checkout ............................................................................. 7
Operation ............................................................................ 8
Troubleshooting ................................................................... 8
PRODUCT DATA
Contents
68-0177-1

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell T8205B

  • Page 1: Table Of Contents

    FEATURES • T8205 requires 24 Vac power supply; TS8205 is used in a 750 mV self-generating system. • T8205B,C and TS8205B,C include an electronic control module and setpoint panel packaged together to simplify installation. The sensor must be ordered separately.
  • Page 2: Specifications

    Order numbers for Control System and Sensor Assembly; or Control Module, Setpoint Panel and Sensor Assembly. Leadwire length for Q8205A-C. For T8205B,C: Heat-On LED, LED Terminal and N.C. Contacts, as desired. See Table 2 for availability. For T8205A, TS8205A, Q8205A-C optional features as desired. See Tables 3 and 4 for availability.
  • Page 3 NTC thermistor sensor is imbedded in a copper bulb. Includes Specify when ordering. leadwires with 3/16 in. female quick connects. See Table 5. Dimensions: See Fig. 1 for T8205B,C; TS8205B,C; Q8205A; T8205A,H; TS8205A dimensions. See Table 5 for sensor dimensions. Table 5. Sensors. Sensor Termination...
  • Page 4 3/8 IN. (10 MM) RECOMMENDED FOR SHAFT CLEARANCE HOLE. 17/32 1-31/32 (13) (50) (13) POTENTIOMETER SHAFT DIAMETER .24 IN. (6 MM). 11/32 (9) SWITCH SHAFT DIAMETER .25 IN. (6 MM). 2-5/8 (76) (67) 1-31/32 (50) M11013B Fig. 1. T8205B,C; TS8205B,C; Q8205A; T8205A,H; TS8205A dimensions in in. (mm). 68-0177—1...
  • Page 5: Installation

    T8205B,C, TS8205B,C ELECTRONIC POOL, SPA CONTROL SYSTEMS; T8205A,H, TS8205A CONTROL MODULES; Q8205A-C SETPOINT PANELS AND SENSOR ASSEMBLY INSTALLATION The T8205B,C and TS8205B,C Control Systems can be mounted on the appliance through mounting holes on the device. Mount in a location that is below high temperature When Installing this Product…...
  • Page 6 PROTECTION AS REQUIRED. Q8205B HAS ONE POTENTIOMETER, Q8205C HAS TWO POTENTIOMETERS. M11014B FACTORY WIRED ON T8205B,C. Fig. 4. T8205B,C (TS8205B,C has similar wiring configuration) wired to 24V gas control to control water temperature in pool, spa, or hot tub (T8205B shown). 68-0177—1...
  • Page 7: Settings

    T8205B,C, TS8205B,C ELECTRONIC POOL, SPA CONTROL SYSTEMS; T8205A,H, TS8205A CONTROL MODULES; Q8205A-C SETPOINT PANELS AND SENSOR ASSEMBLY TS8205B Q8205B SWITCH TS8205A ALTERNATE HIGH LIMIT CONTROL LOCATION (AUTO RECYCLE) SENSOR -(TH/PP) HIGH LIMIT CONTROL +(PP) (MANUAL RELIGHT) VALVE (TH) Q313 ®...
  • Page 8: Operation

    90°F 1° 106°F assembly to sense the actual water temperature. The T8205A,H and TS8205A are used with the Q8205A-C. The T8205B,C and 19° 19° the TS8205B,C include the Q8205B,C. The setpoint potentio- meter on the Q8205 is used to set the operating temperature.
  • Page 9 T8205B,C, TS8205B,C ELECTRONIC POOL, SPA CONTROL SYSTEMS; T8205A,H, TS8205A CONTROL MODULES; Q8205A-C SETPOINT PANELS AND SENSOR ASSEMBLY CHECK VOLTAGE: T8205/Q8205 24V TERMINALS; TS8205/Q8205 + AND - TERMINALS. VOLTAGE: T8205/Q8205 BETWEEN 21.5 TO 28.5V; VOLTAGE OUTSIDE RANGE: T8205/Q8205 21.5 TO 28.5V;...
  • Page 10 T8205B,C, TS8205B,C ELECTRONIC POOL, SPA CONTROL SYSTEMS; T8205A,H, TS8205A CONTROL MODULES; Q8205A-C SETPOINT PANELS AND SENSOR ASSEMBLY CHECK VOLTAGE: T8205/Q8205 24V TERMINALS; TS8205/Q8205 + AND - TERMINALS. VOLTAGE: T8205/Q8205 BETWEEN 21.5 TO 28.5V; VOLTAGE OUTSIDE RANGE: T8205/Q8205 21.5 TO 28.5V;...
  • Page 11 T8205B,C, TS8205B,C ELECTRONIC POOL, SPA CONTROL SYSTEMS; T8205A,H, TS8205A CONTROL MODULES; Q8205A-C SETPOINT PANELS AND SENSOR ASSEMBLY 68-0177—1...
  • Page 12 T8205B,C, TS8205B,C ELECTRONIC POOL, SPA CONTROL SYSTEMS; T8205A,H, TS8205A CONTROL MODULES; Q8205A-C SETPOINT PANELS AND SENSOR ASSEMBLY Automation Control and Solutions Honeywell Asia Pacific Inc. Honeywell International Inc. Honeywell Limited-Honeywell Limitée Room 3213-3225 1985 Douglas Drive 35 Dynamic Drive Sun Hung Kai Centre...

Table of Contents