Commissioning I/O Modules; Updating Software - Honeywell Excel 800 Installation And Commissioning Instructions

Excel 800

Commissioning I/O Modules

Commissioning Panel Bus I/O Modules
During CARE engineering, the HEX address of the Panel
I/O modules is defined.
NOTE: In the case of Panel Bus I/O modules, it is
essential that the HEX switch be set to the
address assigned during CARE engineering.
The XCL8010 Controller automatically commissions all
Panel Bus I/O modules.
Commissioning L W
ON ORKS
Commissioning is done using CARE.

Updating Software

The XCL8010 Controller's software can be updated using
CARE.
Software with Panel Bus I/O Modules
The XCL8010 Controller's firmware includes the firmware
for the Panel Bus I/O modules. Thus, whenever the
XCL8010 Controller's firmware is updated, the firmware of
the Panel Bus I/O modules is automatically updated, too.
Bus I/O Modules
29
Wiring and Setting Up the System
Example
Status before update: The XCL8010 Controller was loaded
with controller firmware V3.01.03, which included the cor-
responding Panel Bus I/O module firmware (see Fig. 41).
When the controller firmware is updated from V3.01.03 to
V3.02.02, if newer firmware is available for individual Panel
Bus I/O modules, their firmware will be automatically
updated, too. In this example, newer Panel Bus I/O module
firmware is, indeed, available for all but the XF830A Mixed
Panel Bus I/O modules. As a consequence, the firmware of
all of the Panel Bus I/O modules – except for the XF830A
Mixed Panel Bus I/O modules – will be updated,
accordingly.
XCL8010A XCL8010A
firmware V3.01.03 firmware V3.02.02
XF821A firmware V1.01.01 XF821A firmware V1.01.05
XF822A firmware V1.01.01 XF822A firmware V1.01.05
XF823A firmware V1.01.00 XF823A firmware V1.01.04
XF824A firmware V1.01.00 XF824A firmware V1.01.04
XF825A firmware V1.01.00 XF825A firmware V1.00.02
XF830A firmware V1.00.02 XF830A firmware V1.00.02
Fig. 41. Automatic updating of Panel Bus I/O module
firmware (example)
Software with L W
ON ORKS
The software of the L W
ON ORKS
using CARE or EXCELON.
XF821A updated to V1.01.05
XF822A updated to V1.01.05
XF823A updated to V1.01.04
XF824A updated to V1.01.04
XF825A updated to V1.00.02
XF830A not updated
Bus I/O Modules
I/O modules can be updated
EN1B-0375GE51 R0315